FURIA - FURIA REVERS

FURIA - FURIA REVERS

Designed for maintenance work in gardens and parks.  Mulcher for grass and pruning up to Ø 2 cm.

The machine is equipped with a free discharge after the roller that permits non-stop work, even in the most difficult work conditions.

EQUIPEMENT STANDARD:

  • Attelage tracteur Cat.0

  • Trasmission a bain d'huile avec roue libre

  • Trasmission a bain d'huile avec double roue libre (REVERS)

  • Roulements rouleau à sphere oscillante

  • Roulements rotor à double rouleau

  • Rotor équilibré électroniquement

  • Diamètre rotor 107mm

  • Rouleau d'appui avec décrottoir réglable en hauteur

  • Rouleau d'appui auto nettoyant réglable en hauteur

  • Diamètre rouleau 144mm

  • Capot arrière amovible pour entretien

  • Vitesse de coupe 57 m/sec​

  • Châssis à double configuration de déchargement

  • Prédisposition pour position REVERS

HAMMERS DOUBLE EDGED INNOVATIVE AND PATENTED

Main advantages:

  • double cutting surface both horizontally and vertically

  • low drag, less fuel consumption

  • greater impact resistance against rocks and stony bodies due to the particular shape of the neck

The hammers are mounted on a steel screw 12.9 with a diameter of 16 mm and are fixed to the rotor by means of supports made ​​of boron steel.

POSSIBILITY OF ASSEMBLE KNIVES IN DIFFERENTS SETTINGS

 

Main advantages:
Knives Y, ideal for cutting and quickly discharge.

SUPPORT ROTOR AND BEARING

 

Rotor lateral supports are made of pressed steel,and then worked in order to obtain a single body without welding.


Supports are mounted on double ball bearings highly professional working with labyrinth which means double double lip seals.

TRANSMISSION

The gearbox is made by COMER and is bathed in oil, as well as the extension.

The lateral transmission has 4 belts mounted in pulleys that have been balanced electronically independently.

PAINTING AND SPECIAL ZINC

Paint of Tierre machines is done with epoxy powder.
All parts are painted separately before assembly in an oven at 180 ° C for 3 hours.
This system ensures the total resistance of the machine to atmospheric agents.
The parts are assembled with different faces that touch the paint with paint, ensuring the life of the machine.
The galvanized parts of the machine are provided by zinc bath at a temperature of 450 ° C

PART

TIERRE GROUP SRL

Via Valsugana, 24
35010 Curtarolo (PD) Italy
C.F. e P.IVA IT 0389 1060281

CONTACTS

Phone +39 049 9620631
Fax +39 049 557139

commerciale@tierreonline.com
REA 345 184
Nominal capital € 100.000 

LINKS