BROYEUR REPLIABLE

AQUILA

Le broyeur repliable AQUILA 640 est un broyeur pesant qui peut être utilisé sur les cultures de maïs, de tournesols, d’herbe, de paille et de riz.

Il est indiqué pour le travail sur grandes extensions de terrain et pour les grosses entreprises où il trouve une combinaison parfaite avec les tracteurs de puissances supérieures à 150 CV.

Le rotor doté d’un grand nombre d’outils, sur lequel il est possible de monter indifféremment des marteaux ou des couteaux, consent une coupe rapide et propre. Le double châssis en HARDOX 450 consent une usure réduite de la machine en améliorant  l’investissement.

Le nouveau châssis, à 4 modalités différentes de déchargement, consent de réduire l’emploi de carburant et d’améliorer la vitesse de travail.

EQUIPEMENT STANDARD:

  • Attelage tracteur Cat. 2 – Cat. 3

  • Trasmission a bain d'huile avec roue libre

  • Patins d'appui réglables en hauteur

  • Courroies dentées

  • Roulements rotor à double rouleau oscillant

  • Rotor équilibré électroniquement

  • Diamètre rotor 219mm

  • Rouleau d'appui avec décrottoir réglable en hauteur

  • Diamètre rouleau 194mm

  • Capot arrière amovible pour entretien

  • Vitesse de coupe 70 m/sec

  • Fermeture de sûreté hydraulique et automatique pour la circulation rautière

  1. Rotor équipé d'un grand nombre d'outils

  2. Têtes avec nivellement hydraulique au sol

ROTOR

The electronic balancing of the rotor of 2000 rpm, allows AQUILA an increase in performace up to 30% compared to the performance of a classic stalk chopper, reaching a full 70 m/sec of peripheral cutting speed.

HAMMERS DOUBLE EDGED INNOVATIVE AND PATENTED

Main advantages:

  • double cutting surface both horizontally and vertically

  • low drag, less fuel consumption

  • greater impact resistance against rocks and stony bodies due to the particular shape of the neck

The hammers are mounted on a steel screw 12.9 with a diameter of 16 mm and are fixed to the rotor by means of supports made ​​of boron steel.

POSSIBILITY OF ASSEMBLE KNIVES IN DIFFERENTS SETTINGS

Main advantages:
• Knives Y, ideal for cutting and quickly discharge.
• Knives Y and vertical knive, ideal for grinding.

The knives are mounted on a nitrided bushing, which in turn is mounted on a screw. This greatly reduces the wear of the knife if it was mounted directly on the screw.

SUPPORT ROTOR AND BEARING

Rotor lateral supports are made of pressed steel,and then worked in order to obtain a single body without welding.

Supports are mounted on double ball bearings highly professional working with labyrinth which means double double lip seals.

TRANSMISSION

The gearbox is made by COMER and is bathed in oil, as well as the extension.

 

The lateral transmission has 4 belts mounted in pulleys that have been balanced electronically independently.

Pulleys electronically calibrated independently.

REAR ROLLER

The rear roller support with adjustable height is 194 mm in diameter
Undoubtedly the largest of its kind.

The rullo is mounted on an oscillating field bearing, which in turn is inserted in a special holder of galvanized steel.

The assembly is easily adjustable through holes for regulazión height.

PAINTING AND SPECIAL ZINC

Paint of Tierre machines is done with epoxy powder.
All parts are painted separately before assembly in an oven at 180 ° C for 3 hours.
This system ensures the total resistance of the machine to atmospheric agents.
The parts are assembled with different faces that touch the paint with paint, ensuring the life of the machine.
The galvanized parts of the machine are provided by zinc bath at a temperature of 450 ° C

PART

TIERRE GROUP SRL

Via Valsugana, 24
35010 Curtarolo (PD) Italy
C.F. e P.IVA IT 0389 1060281

CONTACTS

Phone +39 049 9620631
Fax +39 049 557139

commerciale@tierreonline.com
REA 345 184
Nominal capital € 100.000 

LINKS